Figure 3-28. Water Pump Drive Coupling, Removal.

TM 55-1930-208-24

(3) Refer to figure 3-28 and place a clean, folder cloth (item 23, Appendix C) between both rotors

and another between the rotor and housing (1).

(4) Remove bolt (2).

(5) Thread screw into the water pump drive coupling, then attach slide hammer and remove coupling

(3).

Figure 3-28. Water Pump Drive Coupling, Removal.

(6) Refer to figure 3-29 and remove bolts (1), three flat washers (2), three lockwashers (3), and rotor

and drive hub (4).

(7) Remove three bolts (5), three lockwashers (6), three flat washers (7), and two plates and spacers

(8).

(8) Remove bolt (9), washer (10), and retainer (11).

(9) Remove two bolts (12), washer (13), and fuel pump coupling disc (14).

Figure 3-29. Drive Gears, Removal.

3-61