RESERVOIR, HYDRAULIC.

TM 55-1930-208-24

(2) Install adapter (8), tee (7), elbow (6), and adapter (5). Install two hoses (4 and 3).

(3) Install cap (1) and tighten locknut (2).

3-14. RESERVOIR, HYDRAULIC.

This task covers:

a. Removal

b. Service

c. Installation

INITIAL SET-UP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Materials Required:

Washer, Lock P/N MS35338-46

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

Lines and fitting disconnected (paragraph 3-13).

a. Removal. (Refer to figure 3-14).

(1) Remove reducer (1) and filter element (2).

(2) Remove two nuts (3), two lockwashers (4), and two bolts (5) and remove the reservoir (6) from the

mounting bracket.

(3) Remove four nuts (7), four lockwashers (8), and four bolts (9) securing the mounting bracket (10).

b. Service. Service is limited to replacing filter element (2).

3-33