Section V. MAINTENANCE OF GEAR, DECK

TM 55-1930-208-24

Section V. MAINTENANCE OF GEAR, DECK

3-10. BILGE PUMP AND PIPING.

This task covers:

a. Removal

b. Disassembly

c. Cleaning

d. Inspection

e. Repair

f. Reassembly

g. Installation

INITIAL SET-UP:

Tools Required:

Tool Kit, General Mechanic's (Item 1, Appendix B)

Materials Required:

Gasket P/N MIL-G-1149

Solvent, Cleaning (Item 4, Appendix C)

Equipment Conditions:

Engine shut down (paragraph 2-11, TM 55-1930-208-10).

a. Removal. (Refer to figure 3-7).

(1) Remove two nuts (1) and two bolts (2) and separate bilge pump (3) from the piping. Remove gasket (4)

from the pump flange. Discard gasket (4).

(2) Remove foot valve (5) from the opposite end of the piping.

(3) Remove remaining piping by disconnecting two pipe unions (6) and separate the five pipes (7) and two

elbows (8).

3-15