 |
|||
|
|
|||
|
Page Title:
Post-Operation Check of Controls. |
|
||
| ||||||||||
|
|
 TM 55-1915-200-10
Sheet 3 of 4) through anchor shackle (22) and attaching
WARNING
holdback wire to padeyes (23).
Before
operating
winch,
clear
personnel and foreign objects from
2-7.10.3.5.
Post-Operation Check of Controls.
spools, wire rope, clutches and
related components. Moving winch
parts can cause serious injury or
NOTE
death.
Perform the following checks after
operating the stern anchor winch.
b. Engage hydraulic brakes (11, Sheet 1 of 4).
c. Engage and lock main spool clutch (19, Sheet 2
a. Conduct a complete inspection of winch and
of 4).
components.
d. Disengage main spool dog (14, Sheet 1 of 4).
b. Engage brakes (11, Sheet 1 of 4).
c. Engage main spool dog (14).
CAUTION
Never release brakes completely.
d. Disengage clutch (19, Sheet 2 of 4).
Maintain "drag" on brakes to prevent
e. Engage auxiliary spool dog (17).
runaway of spool which could
damage winch.
f. Disengage auxiliary spool clutch (16).
g. Check hydraulic fluid level (7, FIGURE 2-239).
e. Release brakes (11).
h. Stop hydraulic pump as follows.
f. Haul in wire rope by moving control valve (13)
UP.
(1) Depress STOP button (4) on stern ramp
winch motor controller.
g. Hold control valve UP until anchor is up and
(2) Turn off circuit breaker No. 1 on power
against anchor rack.
panel P3 in Emergency Generator Room, main deck aft.
h. Engage brake (11).
i. Turn manual control valve (5) back to stern
CAUTION
ramp winch.
Never engage dog while spool is
moving. Engaging dog while spool
is moving will destroy winch.
i. Engage main spool dog (14).
j. Secure anchor to vessel by inserting anchor
holdback wire (24,
2-618
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals