Stern Anchor Winch Emergency Operation (Hydraulic)

TM 55-1915-200-10

m. Disengage auxiliary spool clutch (17).

d. Install stern ramp ladder (3, Sheet 4 of 4) to

mezzanine deck portside.

2-7.10.3. Stern Anchor Winch Emergency Operation

e. Secure ratchet dogs (1) to ramp (2) with shackle

(Hydraulic).

(6, FIGURE 2-237).

NOTE

f. Tighten ratchet dogs (1, FIGURE 2-236, Sheet 4

If the stern anchor winch hydraulic

of 4).

pump fails, use the stern ramp winch

g. Move ladder (3) to starboard side.

hydraulic pump.

h. Secure ratchet dogs (1) to ramp with shackle (6,

WARNING

FIGURE 2-237).

Inspect winch and components for

i. Tighten ratchet dogs (1, FIGURE 2-236, Sheet 4

damage prior to operating.

of 4).

Do not operate winch with guards removed.

j. Slacken cable by moving control lever (13,

Sheet 1 of 4) down.

Stay alert.

k. Engage auxiliary spool locking dog (17, Sheet 2

of 4).

Never operate winch alone.

Keep all personnel clear of moving winch and

(1) Remove bolt (2, FIGURE 2-238) from

wire rope.

open end socket (3) on end of main ramp cable (4).

(2) Place open end socket (3) over padeye

Never wear loose clothing or jewelry while

(6).

operating winch.

(3) Align opening of socket (3) with opening

of padeye (6).

Never attempt to guide wire rope onto spools.

(4) Place bolt (2) through the socket (3) and

padeye (6) opening.

Never leave controls while winch is operating.

(5) Secure bolt with cotter pin (1).

Never perform maintenance while winch is

NOTE

running.

It may be necessary to jog the spool

to engage dog.

2-7.10.3.1. Pre-Operation Check.

l. Press STOP button (9, FIGURE 2-236, Sheet 1

a. Move winch control valve (13, FIGURE 2-236,

of 4) to remove power.

Sheet 1 of 4) to NEUTRAL.

b. Set brakes (11) to 1500 psi.

Refer to gauge

(12).

c. Engage main spool dog (14).

2-613