Initial Setup Procedure - TM-55-1905-223-24-70145

TM 55-1905-223-24-7

d. Remove protective caps, plugs, inserts, wrappings, and tape when inspection/ inventory is completed. Inspect

piping openings for damage. Wipe off dirt, grease, or protective films.

e. Remove chocks from resilient mounted components.

3-5.

Initial Setup Procedure. Includes operational checks and inspection that are not performed for a routine startup.

Direct support maintenance personnel will perform initial setup in accordance with the operator's manual, TM 55-

1905-223-10.

3-6. Normal Startup. Refer to the operator's manual, TM 55-1905-223-10.

3-7. Shutdown Procedure (Normal or Emergency). Refer to the operator's manual, TM 55-1905-223-10.

SECTION III. INTERMEDIATE DIRECT SUPPORT PREVENTIVE

MAINTENANCE CHECKS AND SERVICES (PMCS)

3-8.

PMCS. There is no PMCS at the direct support level. See Chapter 2, Section III.

SECTION IV. INTERMEDIATE DIRECT SUPPORT TROUBLESHOOTING

3-9.

There is no troubleshooting at the direct support level. See Chapter 2, Section IV.

3-2