 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-1905-223-24-7
REPAIR
a. Inspect nonmetallic hoses (3) for cracks or swelling. Replace hoses if cracked or swollen.
b. Inspect hose elbow adapters (6) and hose adapter (7) for cracks or breaks. Replace if cracked or broken.
c.
The solenoid valve is repaired by replacement.
ASSEMBLY
a. Install hose adapter (8) in solenoid valve (7).
b. Install hose elbow adapters (6) in solenoid valve (7).
c.
Install mounting bracket (9) between cap (5) and solenoid valve (7) and
secure cap (5).
d. Install three nonmetallic hoses (3) and three hose clamps (4) on elbow hose
adapters (6) and hose adapter (8).
e. Secure nonmetallic hoses (3) with hose clamps (4).
REPLACEMENT
a. Position and support solenoid valve assembly in watermaker assembly and secure mounting bracket (9) with two
machine screws (1).
b. Connect wiring inside of spiral wiring wrap (2) at water quality water monitor. Remove tags.
c.
Connect three nonmetallic hoses (3) at product flowmeter assembly and brine manifold assembly and secure with
hose clamps.
d. Close appropriate inlet feedwater gate valve (2, FIGURE 2-28, Sheet 1).
e. Start up watermaker. Refer to TM 55-1905-223-10.
f.
Check for proper operation. Refer to TM 55-1905-223-10.
2-94
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals