REPAIR - TM-55-1905-223-24-170095

TM 55-1905-223-24-17

(8)

Use a puller and remove bearings (12, 22) and inner caps (18, 21) from shaft (16).

b. Assemble motor (1) as follows:

(1)

Use a hydraulic press and install new bearings (12, 22) on shaft (16).

(a)

Make sure the collars are facing each other on the shaft.

(b)

Refer to measurements recorded and place bearings on shaft in same positions as old bearings

that were removed.

(2)

Install the shaft (16) and bearings (12, 22) assembly into the motor.

(3)

Install washer (23) and front end bracket (5). Install bracket bolt (6).

(4)

Install outer fan (3) on motor shaft and install fan clamp (24).

(5)

Align grease entry tube (4) and install fan cover (2). Install fan cover bolts (7).

(6)

Install back end bracket (11) and dirt deflector (14). Install bolts (17).

(7)

Position woodruff key (15) in shaft spline.

(8)

Install motor (1) onto fan unit (paragraph 3-17).

2-66