Transporter Suspension Frame Assembly. - TM-55-1740-202-13-P0060

TM 55-1740-202-13&P

(5) Install equalizer lever (13, fig. 4-7) and equalizer lever spring (14).

(6) Install shoe return springs (1).

g. Transporter Suspension Frame Assembly.

(1) If removed, install front and rear transporter suspension frames (29, fig. 4-6) with hex head bolts (4), flat

washers (3), lockwashers (2), and nuts (1).

(2) If removed, install chains and chain shackles (5).

(3) Install transporter suspension frame (29) to wheel suspension frame tube bracket with straight pins (23),

flat washers (22), and cotter pins (21).

(4) Install transporter suspension frame (29) to lockout struts (27) with lockout strut pins (26) and cotter

hairpins (25).

(5) Install wheel suspension frame to lockout struts (27) with straight pin (24), flat washer (22), and cotter pins

(21).

(6) Install hydraulic jack (28) to wheel suspension frame and transporter suspension frame (29) with straight

pins (24), flat washers (22),and cotter pins (21).

h. Banjo Suspension Spring Assembly.

(1) If necessary, install kingpin (12, fig. 4-5) into back mounting plate (11).

(2) Install thrust bearing (10), O-ring (9), and felt washer (8) into back mounting plate (11).

(3) Install seven springs (7) (the eighth compartment, aligned with the spindle, remains empty).

NOTE

Pack front bearing assembly (4) with grease before installing

(4) Install front plate assembly (6), front bearing assembly (4), and seal washer (3). Install nut (2) and cotter

pin (1).

i. Rear Axle Assembly.

(1) Attach transporter suspension frame to wheel suspension frame (5, fig. 4-4), using straight pins (13), flat

washers (7), and cotter pins (6).

4-29