DISASSEMBLY - TM-55-1730-228-13-P0291

TM 55-1730-228-13&P

4-29. DECK EXTENSIONS - REPAIR (Continued)

4-27

a. DISASSEMBLY:

NOTE

Procedures are given for left side rollers. Right side rollers are replaced using the same procedures.

(1) Remove nuts (1, Figure 4-35) from camfollower assemblies (2 and 3).

(2) Remove rollers (4) and lockwashers (5).

(3) Remove roll pins (6) and rollers (7).

(4) Remove nuts (8), and lockwashers (9) and rollers (10) from left side deck extension (11).

(5) Remove right side roller, repeat steps a(1) through a(4).

b. INSPECTION:

(1) Clean all parts with cleaning solvent and dry with a lint-free cloth.

(2) Inspect rollers for evidence of wear, burrs, nicks, chips, scoring and other damage.

(3) Replace damaged parts with new parts.

c. ASSEMBLY:

(1) Position rollers (10) in left side deck extension (11).

(2) Install lockwasher (9) on roller studs and secure with nuts (8).

(3) Place rollers (7) in position between frame rails.

(4) Install roll pins (6) through rollers (7).

(5) Position rollers (4) in camfollower assemblies (2 and 3) and secure with nuts (1) and lockwashers (5).

(6) Install deck extensions. Refer to para 4-26.

(7) Lubricate rollers with spray lubricant.

(8) Install right side roller, repeat steps c(1) through c(7).

(9) Operational check for proper function.

END OF TASK

4-99