Figure 4-33. Platform Mounting (Sheet 2 of 2).

TM 55-1730-228-13&P

4-27. PLATFORM - REPLACE (Continued)

4-27

Figure 4-33. Platform Mounting (Sheet 2 of 2).

(17) Remove platform control box cable (13) from platform (7).

(18) Remove screws (14) securing platform light socket (15). Remove light socket.

(19) Position overhead hoist over platform (7) and install slings around platform.

(20) Take slack out of slings to take weight off platform (7).

(21) Remove four nuts (16) and four washers (17) securing four camfollowers (18) to scissors (19). Remove

camfollowers.

(22) Use hoist and remove platform.

b. INSTALLATION:

(1) Use hoist and carefully position platform (7, Figure 4-33) over scissors (19).

NOTE

Maneuver platform so the camfollower tracks are aligned with scissors.

GO ON TO NEXT PAGE

4-92