Figure 4-33. Platform Mounting (Sheet 1 of 2).

TM 55-1730-228-13&P

4-27. PLATFORM - REPLACE (Continued)

4-27

Figure 4-33. Platform Mounting (Sheet 1 of 2).

(9) Remove four nuts (1, Figure 4-33), lockwashers (2), washers (3), washers (4) and capscrews (5) securing junction box

(6). Remove junction box and allow to hang.

(10) Remove any tie straps securing cables to platform (7).

(11) Remove two limit switch cables from platform (7).

(12) Remove six screws (8) securing rear bumper (9) to platform (7).

(13) Remove rear bumper and cable (9) from platform (7).

(14) Remove screws (10) securing three safety bumpers (11) to platform (7).

(15) Remove safety bumpers and cables (11) from platform (7).

(16) Remove nut securing platform control cable strain relief fitting (12) to platform (7).

GO ON TO NEXT PAGE

4-91