Figure 4-22. Oil Cooler Replacement (Sheet 2 of 2).

TM 55-1730-228-13&P

4-19. TRANSMISSION OIL COOLER - REPLACE (Continued)

4-19

Figure 4-22. Oil Cooler Replacement (Sheet 2 of 2).

(2) Install elbow fitting (11) in oil cooler (4).

WARNING

Cooling fins are sharp. Wear gloves when replacing cooler. Failure to do so may result in serious

personal injury.

(3) Carefully place oil cooler (4) in position on frame (6) using care not to damage cooling fins.

(4) Secure cooler (4) to frame (6) by tightening four capscrews (5).

(5) Using two wrenches, connect inlet (1) and outlet (2) hoses to cooler using the tags for identification.

(6) Connect outlet hose (1) to swivel fitting (3) using two wrenches.

(7) Use plastic ties and secure any hydraulic hoses that may rub on structural components.

(8) Start the SPEMS and check for leakage.

(9) Check hydraulic reservoir level and refill if necessary.

END OF TASK

4-68