 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM55-1730-228-13&P
4-17.
PLATFORM CYLINDER - REPAIR (Continued)
4-17
Figure 4-19 .
Platform Cylinder Assembly (Sheet 2 of 2) .
a. DISASSEMBLY:
(1) Remove four tie rod nuts (1, Figure 4-19) from four tie rods (2) on rod end of cylinder.
(2) Remove four tie rods (2) from end caps (3) and (4).
(3) Remove end cap (3) from cylinder tube (5).
(4) Slide piston (6) and rod assembly (7) out of tube (5).
NOTE
End cap (4) will come off with piston.
(5) Remove nut (8) and capscrew (9). Unscrew rod eye (10) from rod (7).
(6) Remove nut (11) from rod (7) and remove piston assembly (6).
(7) Remove piston seals (12) from piston (6).
(8) Slide rod (7) out of end cap (4).
(9) Remove rod wiper (13) from end cap (4) and discard.
(10) Remove rod seal (14) and backup washer (15) from end cap (4).
(11) Remove tube seal (16) from end cap (4).
(12) Remove tube seal (17) from end cap (3).
GO ON TO NEXT PAGE
4-60
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals