Figure 3-17. Battery Cable Replacement (Sheet 2 of 2).

TM55-1730-228-13&P

3-17. BATTERY CABLES - REPLACE (Continued)

3-17

Figure 3-17. Battery Cable Replacement (Sheet 2 of 2).

WARNING

Always begin at the battery ground (-) when removing battery cables.

a. REMOVAL:

(1) Remove two nuts (1, Figure 3-17), two washers (2), strap (3) and cover (4) from battery box (5).

(2) Loosen the negative (-) cable terminal nut (6) at negative post of battery and remove terminal (7) from

battery (8).

(3) Loosen positive (+) cable terminal nut (9) at positive post of battery and remove terminal (10) from battery

(8).

(4) Loosen two negative terminal cable clamp bolts (11) and remove terminal (7) from cable (12).

(5) Loosen two positive terminal cable clamp bolts (13) and remove terminal (10) from cable (14).

(6) Remove any tiestraps that may be securing cables (12 and 14) to frame and discard.

(7) Remove capscrew (15), nut (16) and lockwasher (17) from frame. Remove negative (-) cable (12) and

discard.

(8) Remove nut (18) and lockwasher (19) from starter solenoid. Remove positive (+) cable (14) and discard.

GO ON TO NEXT PAGE

3-46