Parking brake assembly - Replace (Cont)
This task covers: Disassembly and Reassembly (AVIM)
Tool kit, aircraft mechanics general NSN 5180-00-323-4692
Shop set, AVIM, tool crib NSN 4920-00-472-4183
Wrench, torque 0-600 i n - l b s
MOS 67( )10
Para 3-61 Hub removed from axle
Para 3-64 Brake assembly removed from axle
1. Remove two screws and two lock washers to loosen the sector from the back of
the mounting plate. Note position of the sector and pedal assembly for reassembly.
Loosen screw and remove the pedal assembly along with the sector.
3. Turn the mounting plate over and push in on the clip. Pull the spring pin
free from the back of the mounting plate and remove the compression spring and
clip from the front of the mounting plate.
4. Remove the shoe assembly with tension spring from the front of the mounting
plate. Remove spring from brake lining.
5. Remove the camshaft assembly and the two washers.
GO TO NEXT PAGE