REMOVING AND INSTALLING BRAKE ASSEMBLY (AVIM).

TM 55-1730-224-13 & P

3-31. REMOVING AND INSTALLING BRAKE ASSEMBLY (AVIM).

1. Remove wheel and hub (para. 3-26) .

2. Remove brake drum (5) from brake assembly (6).

3. Loosen nuts (2). Remove

washers (3) and bolts (4).

4. Pull brake assembly (6) back

from spindle (1).

5. Position new brake assembly

(6) on spindle (1). Align holes.

6. Secure with bolts (4) washers

(3) and nuts (2).

7. Reinstall brake drum.

8. Reinstall wheel and hub.

3-32. SUMMARY REAR AXLE MAINTENANCE. Maintenance tasks are listed with,

where-to-find detail procedures in table 3-9.

Table 3-9. Rear Axle Maintenance Checklist

SEE

TASK

PARAGRAPH

NUMBER

LIST OF TASKS

Inspect (AVUM)

Check rear corner assembly for worn or

damaged parts.

Service (AVUM)

Lubricate fittings at frame tubes

Replace (AVUM)

Perform task 1 above then as needed:

Remove pallet assembly

Remove corner assembly

Install good corner assembly

Reinstall pallet assembly